Transistors As Amplifier

Item Code: SJ253

Principle and Working:

Common emitter amplifier:
The voltage gain of a CE amplifier varies with signal frequency. It is because the reactance of the capacitors in the circuit changes with signal frequency and hence affects the output voltage. The curve drawn between voltage gain and the signal frequency of an amplifier is known as frequency response.
RC coupled amplifier : A resistance capacitance coupled amplifier is basically a multi-stage amplifier are circuit extensively used in electronic circuits. It offers a constant gain over a wide frequency band.
... Differential amplifier: It is a fundamental electronic circuit that amplifies the difference between two input signals while rejecting any common-mode signal. It is commonly used in operational amplifiers etc.
Vout = R3 (V2–V1)/R1




  • To study CE amplifier frequency response.
  • To study RC-coupled amplifier (multistage amplifier).
  • To study differential amplifier circuits.
  • Students use plug-in modules for circuit design.
  • Component mounted on PCB and these PCB fix in a transparent housing for the visibility of the components.
  • The symbol's name and the value of the components are printed on top of the transparent housing.
  • Convenient & Easy to make circuit diagram using plug-in modules.
  • Do it yourself approach provodeds better learning.
  • Economical & Flexible method of performing all experiments on one circuit board.

    Signal Generator

  • Signal Generator: Range 10Hz to 110 KHz, Wave form Sine & Square.
  • Output Continuously variable from 0-7V p-p,5W.
  • Input Voltage 230V AC, 50Hz
  • Regulated Power Supply

  • Regulated Power Supply : Output Voltage 0 -16V, 1 Amp, 5V. 1 Amp. DC Fixed
  • Ripple Less than 25mV
  • Display 3 1/2 Digit LED for 0-16V DC
  • Input voltage 230V AC, 50 Hz
  • Plug-in Modules

  • 2/ 4 pin modules, 4mm plug-in pins, transperent cover, Symbol/Circuit printed on cover.
  • Plug-in Board

  • Plug-in board has 4mm sockets, arranged in 2 x 2 matrix. Total matrix 24nos.

  • Note: CRO/DSO not supplied with this setup.

  • 1 Circuit Board
  • 1 Capacitor Module 0.001µF
  • 3 Capacitor Module 0.47µF
  • 2 Capacitor Module 0.1µF
  • 2 Digital Multimeter
  • 6 Flexible Lead Set (25cm)
  • 4 Flexible Lead Set (50cm)
  • 3 Flexible lead Set (100cm)
  • 2 Resistor Module 1kΩ
  • 2 Resistor Module 3.3kΩ
  • 5 Resistor Module 10kΩ
  • 2 Resistor Module 15kΩ
  • 2 Resistor Module 33kΩ
  • 2 Signal Generator
  • 2 Transistor Module BC107
  • 2 Transistor Module BC109
  • 1 Transistor Module 2N2222
  • 1 Power Supply +/- 15V
  • 1 Variable Power Supply
  • 1 CRO 20MHz(Optional)